SunSun JTP-8000 Submersible Pump

SunSun JTP-8000 Frequency Variation Submersible Pump – High Flow, Ultra‑Quiet Performance for Fresh & Sea Water Ponds

The SunSun JTP‑8000 combines innovative variable‑frequency technology with a robust ceramic shaft to deliver a massive 8000 LPM flow at just 60 W. Designed for both freshwater and marine environments, this pump operates with minimal noise, high head capability, and a long, rust‑free service life. Its lock‑rotor protection instantly shuts off power if the water level falls, safeguarding your equipment.

Easy to install and maintain, the JTP‑8000 features a multistage outlet that fits a range of pipe diameters and comes with interchangeable hose adapters (20 mm, 25 mm, 32 mm). Whether you run a koi pond, a decorative water feature, or a large aquarium, this pump provides reliable, efficient circulation without copper contamination.

Specifications

• Power: 60 W
• Voltage: 220‑240 V
• Frequency: 50 Hz
• Output: 8000 LPM
• Weight: 2.5 kg
• Dimensions (mm): 186 × 123 × 137
• Hose Adapter Sizes: 20 mm / 25 mm / 32 mm
• Suitable for fresh and sea water
• Ceramic shaft – wear resistant, rust free
• Locked‑rotor protection – automatic shut‑off on low water

How to Use This Submersible Pump

1. Place the pump fully submerged in the pond or tank, ensuring the inlet is clear of debris.
2. Connect the appropriate hose adapter (20 mm, 25 mm or 32 mm) to match your pipe size.
3. Plug the pump into a 220‑240 V outlet; the variable‑frequency controller will adjust flow automatically.
4. Adjust the flow rate using the built‑in frequency dial to achieve the desired circulation.
5. Monitor the lock‑rotor indicator; the pump will shut off if water level drops below the safe operating point.

Care & Maintenance Tips

• Periodically clean the inlet screen to prevent clogging.
• Inspect the ceramic shaft for any signs of wear and rinse with fresh water after each use.
• Check hose connections for tightness to avoid leaks.
• Run the pump for a few minutes after each cleaning to flush out residual debris.
• Store the pump in a dry environment when not in use to prolong its lifespan.